Clean application surface with either soapy water or rubbing alcohol and allow to fully dry.
Carefully peel away the paper backing, ensure the vinyl sticks entirely to the application tape.
(For BIG stickers/sunstrips leave the backing paper in place and facing the surface you’re applying it to, position the sticker where you want it to go. Place a piece of masking tape along the top edge of the sticker—this fixes it in the proper location.) Continue with above.
Align the decal where you want to install it and carefully place on the surface. Start slowly rubbing the decal from one side to the other so not to create air bubbles.
Start slowly rubbing the decal from one side to the other so not to create air bubbles.
Carefully remove the transfer tape by peeling it back slowly, beginning at a corner.
Stand back and admire your new sticker. Leave to cure for 24 hours before washing your vehicle.
Don’t forget to tag us in your pics on Instagram so we can see what it looks like too.
