Sunstrip Installation Guide

Step 1: Clean

Clean application surface with either soapy water or rubbing alcohol and allow to fully dry.

Step 2: Align & Press

Align the sunstrip where you want to install it making sure it is level and centered, use a tape measure to ensure each side is equal.

Place a piece of masking tape on each side and down the middle of the sunstrip from top to bottom.

Step 3: Peel Backing & Smooth

Carefully peel away the paper backing from one side to the middle and cut off.

From the middle of the sunstrip start slowly rubbing the sunstrip from top to bottom so not to create any air bubbles. You can spray the windscreen with water to aid installation.


Stand back and admire your new sunstrip. Leave to cure for 24 hours before washing your vehicle.

Don’t forget to tag us in your pics on Instagram so we can see what it looks like too.